Auxiliary Equipment
 |
Model 2HTB-C2 turbo blower With the high-performance silencer, this compact two-staged blower offers very quiet operation. The impeller is directly connected to the motor and thus no lubrication is required. Completely adjusted dynamic balance offers no operating vibration.  Static air pressure: 6.9kPa (9.8kPa type is available) |
 Model PRT oil pressure regulator Automatically adjusts the hydraulic pressure according to the tem-perature of combustion air from the oil burner, keeping the excess air ratio constant. |
 |
 Model APR air pressure regulator Regulates the combustion air pressure assuring a correct burner operation. |
 Model WF oil strainer Switchable double oil filter. |
|
 Models CD oil strainers Single type oil strain-er. It is recom-mended to use two strainers in parallel for equipment of continuous opera-tion and switch them over as required. |
|
 Model TOP oil pump A compact, high-performance inner gearing type pump that has a tooth profile formed by the envelope based on the trochoid curve. Suitable for oil com-bustion application. |
 Model RH electrically heated oil heater This is an oil heater for piping lines. A steam heated oil heater is also available. |
|
 Models RV and FRV oil relief valves These relief valves are for setting oil pump oprating pressures. |
 Model BV and FBV butterfly valve |
|
 Model SG, 140SH and 400SH sight hole |
|
 Model R and RH regulating cock |
 Model APV port area variable valve A port area linearly changeable control valve that allows alteration of CV value. |